home *** CD-ROM | disk | FTP | other *** search
/ Interactive Quarterly / The Best of New Machine Publishing 1 - Disc 4: Interactive Quarterly.iso / pc / demos / vdreams / intiq.exe / Readme.vid < prev    next >
Encoding:
Text File  |  1996-03-26  |  11.5 KB  |  263 lines

  1. Thank you for using Virtual Dreams.
  2.  
  3. We bring live models directly to you through your computer.
  4. No special hardware is required.  All you need is our software and you
  5. are ready to go!
  6.  
  7. If you are not at least 18 years old, you cannot use our service.
  8.  
  9. Now that you have installed our software, you are ready to 
  10. interact one-on-one with a beautiful model who is ready 
  11. to fulfill your wildest dreams.
  12.  
  13. Approximately three minutes before end of your session you will be
  14. asked if you would like to extend your session. If you wish to remain
  15. online, simply enter the number of desired additional minutes.  
  16.  
  17. For our current operating hours please check our Web Site or call
  18. 1(800)325-9039 inside the U.S., or 1(619)794-5549 outside the U.S..
  19.  
  20. OPERATING INSTRUCTIONS, INSTALLATION INSTRUCTIONS, AND DISCLAIMER
  21.  
  22. 1)  The first time you run the program, you will need to 
  23. input your billing information and certain other 
  24. information (date of birth, maximum minutes per session, etc.)
  25. Please note that when filling in date of birth information and credit
  26. card information it needs to be formatted correctly. 
  27. (ie.  04/04/71, not 4/4/71).
  28.     
  29. You will also need to select a password for future use.  
  30. Write this password down in a safe place.  In the future 
  31. all you will need to do is enter your password and desired 
  32. minutes for that session (5 minute minimum).  Make sure that you 
  33. input the proper billing address for the credit card that you are 
  34. using.  Inaccurate data will not allow for a connection.
  35.  
  36. 2)  After you have inputted all of the information, 
  37. click on "Proceed" to enter the program.  After it has 
  38. loaded and you can see "ready to make call" in the upper 
  39. right hand corner, click on the "Make Call" button in the 
  40. upper left hand corner to initiate the session.  
  41. After the number is dialed you will be connected 
  42. and a credit check will occur (this can take up to 2 minutes.)  
  43. After the credit is approved you will see an introduction image
  44. in your "Modem Call Window" and a menu of service options. Next,
  45. you will need to make a selection of the service you wish to view.  
  46.  
  47. 3)  Allow up to 30 seconds from the time your selection
  48. is made to the time at which you begin seeing video.
  49. If the service you selected is busy and is available
  50. for queing, you may choose to enter the queue
  51. and wait till this service is available.  While
  52. you are waiting you may move around to other services. You will be 
  53. notified when your turn is up in the queue. 
  54.  
  55. 4)  Now just sit back and enjoy the show.  
  56. Remember, be nice to the girl and sheĆ­ll be nice to you.
  57.  
  58. 5)  If you have any problems just call our technical 
  59. support team at (800)325-9039 inside the U.S., or (619)794-5549
  60. outside the U.S.
  61.  
  62. SETTINGS SCREEN FIELDS
  63.  
  64. The Setup Screen is where you enter pertinent data
  65. for processing your credit information and verifying
  66. any fraudulent use of credit card information.  Please
  67. make certain that the information entered is the same
  68. as the information your card issuer has on file for you.
  69.  
  70. COM PORT
  71.  
  72. In this screen you are also asked to make some settings
  73. selections to facilitate your connection.  The Com Port 
  74. selection tells the program where to look for your modem.
  75. If you do not know your Com Port simply select each one 
  76. sequentially until you make a successful connection.  
  77.  
  78. The Dialing Prefix is to enter any numbers or dialing codes you
  79. may need when dialing out. (ie. The code you use to disable
  80. call waiting). The program is already coded
  81. with either the US nationwide (800) number or a local area
  82. phone number for international users.  Use the dialing prefix
  83. to enter any codes necessary to disable call waiting or
  84. or enable an outside line for users on a PBX.  For 
  85. international users enter the international dialing prefixes
  86. to make a direct call to the U.S..  The international version
  87. is coded with a direct dial phone number  1(xxx)xxx-xxxx
  88. enter the prefix necessary for making an international
  89. phone call to the U.S..
  90.  
  91. RAM DRIVE and MODEM TYPE
  92.  
  93. The Ram Drive selection and the Modem Type are the
  94. final connection configuration selections.  The 
  95. modem init strings are organized by manufacturer and modem
  96. model.  If your model is not present on the list select another
  97. and try it, or try one of the generic initialization strings
  98. at the beginning of the list.  If your connection 
  99. fails or you get the message failure to initialize 
  100. modem exit and try another.  
  101.  
  102. The Ram Drive is important for improving video transfer,
  103. performance and in some cases a connection.  A connection
  104. can fail for some computers if a Ram drive is not present.
  105. When installing the program you are prompted with the Ram
  106. drive installer for either Windows 3.1 or Win 95.  You must
  107. reboot your computer for the ram drive to take effect.  The Ram
  108. drive will appear in your File Manager or under MY COMPUTER
  109. as a small chip icon.  In the settings screen of your program
  110. select your Ram drive to tell the program where it will be 
  111. swapping the video data.  If the Ram drive displaces a 
  112. CD-ROM drive or other drive you can remove the Ram drive 
  113. by typing "rem" next to the line it appears on in your config.sys file.  
  114. See the FAQ on the web site for more details.
  115.  
  116. PASSWORD
  117.  
  118. The Password Field allows you to save and recall your personal
  119. information for processing your transaction.  If you have to make
  120. changes to your information simply enter your program and at
  121. the Password screen select the Setup button.  This will take you to
  122. the Setup screen.  When in the Setup screen click your cursor in
  123. the Password field,  type in your password and hit the return key.
  124. The current customer data will appear in the appropriate fields. 
  125. Please note the Password field is case sensitive.  Make your changes
  126. and select the Proceed button.  If you choose to save this password 
  127. It can be used again to recall your data.  If your forget your password
  128. simply retype your information and save it with a current password.
  129. If you have no changes to your information or setup, simply type in
  130. your password on the Password entry screen and select Proceed.  
  131.  
  132. DATE OF BIRTH AND CREDIT CARD
  133.  
  134. The Date of Birth and Credit Card fields must be formatted correctly
  135. for the program to recognize the information as being correct.
  136. The can be no spaces in the credit card number information.
  137. (eg.  1111 1111 1111 1111) must be typed in 1111111111111111. The 
  138. Date of Birth field and Expiration Date field must also be formatted
  139. correctly. (eg. an April 4 birthdate must be entered 04/04/71). The 
  140. Credit Card Expiration Date must also be entered the same way. 
  141.  
  142.  
  143. SYSTEM REQUIREMENTS
  144.  
  145. Minimum System Requirements:486 DX/33 or better
  146. 8MB RAM or more
  147. Microsoft Windows 3.1 or higher
  148. 9600 bps Modem or faster with error correction.
  149. 256 Color SVGA
  150.  
  151. DISCLAIMER and TERMS
  152.  
  153. The program that you have is a copyrighted product and will only work 
  154. with our service.  Any unauthorized distribution is unlawful and will be 
  155. prosecuted to the fullest extent of the law.  Fraudulent credit card use 
  156. will also be prosecuted to the fullest extent of the law. 
  157.  
  158. END USER LICENSE AGREEMENT NO FEE VERSION GRANT. 
  159.  
  160. Virtual Dreams hereby grants you a non-exclusive license to use its
  161. accompanying software product ("Software") free of charge.
  162. You may: use the Software on any computer; use the Software on a second
  163. computer; or copy the Software for archival purposes, provided 
  164. any copy must contain all of the original Software's proprietary notices.
  165. You may not: permit other individuals to use the Software
  166. except under the terms listed above; modify, translate,
  167. reverse engineer, decompile, disassemble (except to the
  168. extent applicable laws specifically prohibit such
  169. restriction), or create derivative works based on the
  170. Software; rent, lease, transfer or otherwise transfer rights to the
  171. Software; or remove any proprietary  notices or labels on the
  172. Software.
  173.  
  174. SOFTWARE.
  175.  
  176. This license does not grant you any right to any enhancement or update.
  177.  
  178. TITLE. 
  179.  
  180. Title, ownership rights, and intellectual property
  181. rights in and to the Software shall remain in Virtual Dreams, and/or
  182. its suppliers. The Software is protected by the copyright
  183. laws of the United States and international copyright
  184. treaties.  Title, ownership rights, and intellectual property
  185. rights in and to the content accessed through the Software is
  186. the property of the applicable content owner and may be
  187. protected by applicable copyright or other law. This License
  188. gives you no rights to such content.
  189.  
  190. DISCLAIMER OF WARRANTY. 
  191.  
  192. Since the Software is provided free of charge, the 
  193. Software is provided on an "AS IS" basis, without warranty of 
  194. any kind, including without limitation
  195. the warranties of merchantability, fitness for a particular
  196. purpose and non-infringement. The entire risk as to the
  197. quality and performance of the Software is borne by you.
  198. Should the Software prove defective, you and not Virtual Dreams
  199. assume the entire cost of any service and repair. This
  200. disclaimer of warranty constitutes an essential part of the
  201. agreement. 
  202.  
  203. SOME STATES DO NOT ALLOW EXCLUSIONS OF AN IMPLIED
  204. WARRANTY, SO THIS DISCLAIMER MAY NOT APPLY TO YOU AND YOU MAY
  205. HAVE OTHER LEGAL RIGHTS THAT VARY FROM STATE TO STATE OR BY
  206. JURISDICTION.
  207.  
  208. LIMITATION OF LIABILITY. 
  209.  
  210. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, 
  211. TORT, CONTRACT, OR OTHERWISE, SHALL VIRTUAL DREAMS OR
  212. ITS SUPPLIERS OR RESELLERS BE LIABLE TO YOU OR ANY OTHER
  213. PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
  214. CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT
  215. LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE,
  216. COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
  217. COMMERCIAL DAMAGES OR LOSSES. IN NO EVENT WILL VIRTUAL DREAMS BE
  218. LIABLE FOR ANY DAMAGES IN EXCESS OF VIRTUAL DREAMS LIST PRICE FOR
  219. A LICENSE TO THE SOFTWARE, EVEN IF VIRTUAL DREAMS SHALL HAVE BEEN
  220. INFORMED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM
  221. BY ANY OTHER PARTY. THIS LIMITATION OF LIABILITY SHALL NOT
  222. APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY TO THE EXTENT
  223. APPLICABLE LAW PROHIBITS SUCH LIMITATION. FURTHERMORE, SOME
  224. STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
  225. OR CONSEQUENTIAL DAMAGES, SO THIS LIMITATION AND EXCLUSION
  226. MAY NOT APPLY TO YOU.
  227.  
  228.  
  229.  
  230. TERMINATION.  
  231.  
  232. This license will terminate automatically if
  233. you fail to comply with the limitations described above.  On
  234. termination, you must destroy all copies of the Software.
  235. MISCELLANEOUS. This Agreement represents the complete
  236. agreement concerning this license between the parties and
  237. supersedes all prior agreements and representations between
  238. them. It may be amended only by a writing executed by both
  239. parties. If any provision of this Agreement is held to be
  240. unenforceable for any reason, such provision shall be
  241. reformed only to the extent necessary to make it
  242. enforceable.  This Agreement shall be governed by and
  243. construed under California law as such law applies to
  244. agreements between California residents entered into and to
  245. be performed within California, except as governed by Federal
  246. law. The application the United Nations Convention of
  247. Contracts for the International Sale of Goods is expressly
  248. excluded.
  249.  
  250. U.S. GOVERNMENT RESTRICTED RIGHTS.
  251.  
  252. Use, duplication or disclosure by the Government 
  253. is subject to restrictions set
  254. forth in subparagraphs (a) through (d) of the Commercial
  255. Computer-Restricted Rights clause at FAR 52.227-19 when
  256. applicable, or in subparagraph (c)(1)(ii) of the Rights in
  257. Technical Data and Computer Software clause at DFARS
  258. 252.227-7013, and in similar clauses in the NASA FAR
  259. Supplement.  Contractor/manufacturer is Virtual Dreams.
  260.  
  261.  
  262.  
  263.